GLUSHU Size Guide
What is your size?
| Fronts | Width (mm) | Width (inch) | Heel-Toe (mm) | Heel-Toe (inch) |
| 4×0 | 113 mm | 4. 1/2″ | 113 mm | 4. 1/2″ |
| 3×0 | 120 mm | 4. 3/4″ | 120 mm | 4. 3/4″ |
| 2×0 | 125 mm | 5″ | 125 mm | 5″ |
| 0 | 135 mm | 5. 1/4″ | 130 mm | 5. 1/8″ |
| 1 | 140 mm | 5. 1/2″ | 135 mm | 5. 1/4″ |
| 2 | 145 mm | 5. 3/4″ | 140 mm | 5. 1/2″ |
| 3 | 150 mm | 6″ | 145 mm | 5. 3/4″ |
| 4 | 155 mm | 6. 1/4″ | 155 mm | 6. 1/4″ |
| Fronts | Width (mm) | Width (inch) | Heel-Toe (mm) | Heel-Toe (inch) |
| 2×0 | 120 mm | 4. 3/4″ | 125 mm | 5″ |
| 0 | 125 mm | 5″ | 130 mm | 5. 1/8″ |
| 1 | 130 mm | 5. 1/8″ | 138 mm | 5. 3/8″ |
| 2 | 138 mm | 5. 3/8″ | 143 mm | 5. 5/8″ |
| 3 | 144 mm | 5. 5/8″ | 150 mm | 5. 7/8″ |
Glushu
Glue on horse shoes
GLUSHU is a flexible cuff bonded to a specially designed aluminium horseshoe. This gives the horse a light, hoof supporting, cushioned shoe which eliminates any stress or damage to the horse’s hoof and is easy to apply.
GLUSHUS are non invasive, completely eliminating the risk of hoof injury due to nailing.
- Easy and fast to apply.
- Available in pairs or pack
- Uses a fast acting glue. We strongly advise you use GLUE-U SHUFIT glue which is specifically designed to be used with GluShu.
- The cuff allows the shoe to be glued in stages.
- No need for any special equipment.
- Simple sizing system.
- A large range of sizes.
- No alteration needed.
- Eliminates the risk of stress when nailing into a thin white line with poor hoof wall.
- Cushions the feet.
- The cuff can be used to hold topical medication in place.
- Prevents further damage to hoof wall.
Shufill
Cushion
- Firm but soft cushion support pad material in four Shores A20 – A30 – A50 – A60.
- 250 ml cartridges fitting in standard caulking guns.
- Offers protection, cushioning and support for the hoof sole.
- Fill up to ground level for support of foundered and laminitis cases.
- Usage of supplied meshes is recommended, but not obliged.
- Set time 2 minutes, depending on weather conditions.
- Temperature and humidity might have effect on the performance of this product.
Shufill
Shock-Absorber
- Firm but soft cushion support pad material in five Shores A10 – A20 – A25 – A30 – A40.
- 250 ml cartridges fitting in standard caulking guns.
- Offers protection, cushioning and support for the hoof sole.
- Always use SHUFILL SHOCK-ABSORBER in combination with SHUPADS!
- Set time 4 minutes, depending on weather conditions. Heating up Shufill shock absorber before use speeds up setting time significantly.
- Temperature and humidity might have effect on the performance of this product.
Shufill
Hoof Packing
- Lightweight hoof filler for shockabsorption and protection.
- Available in 2×660 gr or 2×2.5kg and shores A15 (blue) – A25 (pink) – A35 (green).
- Specially for protecting inner hoof and solar surface.
- Easily mixable and shapeable by hand.
- Easy to cut which makes it applicable in many situations.
- Temperature and humidity might have effect on the performance of this product.
- Heating up Shufill hoof packing before use speeds up setting time significantly.
Shufit
Glue on Shoe
- Glue for bonding horseshoes and hoofwall repairs.
- Available in 150 & 420 ml black and white.
- Fits in standard caulking gun using an adapter or just use the Glue-U dispenser for 150 ml cartridges.
- Bonds steel, aluminium and even urethane shoes.
- Suitable for repairing large cracks and creating extensions.
- Initial set time: 90-120 sec (open time). Weight bearing in 4-5 minutes (even in cold conditions).
- Temperature and humidity might have effect on the performance of this product.
- Heating up Shufit before use speeds up setting time significantly.
Shufix
Fast Set
- Very suitable for making extensions on foals’ hoofs and custom plastic shoes. Also suitable for retouching or rebuilding heels, making medial/lateral corrections and for smaller hoof repairs. The hoof should be clean and especially dry.
- 250 ml cartridges fitting in standard caulking guns.
- Curing time between 30 – 60 seconds, workable after about 5 minutes.
- Temperature and humidity can influence the performance of this product.
Shupads
For Shock-Absorber and Hoof Packing
- Available in 4 types. M and XL flat, L flat and wedge with frog support.
- Transparant.
- Extra durable.
- Highly rigid flex.
- Easy to cut.
- With selfclosing injection holes for packing materials.
Accessories
-
Mixing tips
To be used for all Glue-U products
-
Adapter
for 150 ml cartridges
-
Universal dispenser
For 150/250/310 ml cartridges
-
Dispenser
for 380 ml cartridges
-
Dispenser
for 150 ml cartridges
-
Dispenser
for 200 ml side by side cartridges
-
Spacer tape
For Shufit
-
Mesh
2.5 m x 0.21 m
-
Wrapping foil
with holder
-
Heater
-
Wall rack
